Controlled water chemistry for occupied buildings.
Product selection depends on water analysis, system type, material compatibility, operating temperature and local compliance requirements.
Analysis First
Water analysis before product recommendation.
TDS, SDS and certificates are shared upon request.
Hotels and hospitals contain several water systems with different risks: potable and utility water networks, hot water circuits, cooling towers, closed loops, chilled water systems, boilers, RO/softening systems and wastewater interfaces. Each system requires a different treatment logic. Liberta supports these facilities with PureGuard® potable/utility, cooling, closed loop, boiler, RO and cleaning treatment routes. The focus is corrosion control, scale control, deposit management, material protection, heat-transfer support and controlled system conditioning. For potable/utility water, the public message must remain clear: Liberta does not claim disinfection, sterilization, bacterial kill, biofilm removal or Legionella control. Scale and corrosion management can support reduced habitat-forming conditions, but this must be presented as water-network engineering support, not a biocidal claim.
Typical water-related problems
| Problem | Why It Matters | Response |
|---|---|---|
| Scale and deposits | Hardness and temperature can create scale in heaters, valves, fixtures, exchangers and utility systems. | PureGuard® Potable/Utility + Cleaning |
| Corrosion | Metal components may remain present even in plastic-pipe networks. | PureGuard® Potable/Utility |
| Habitat-forming surfaces | Scale, corrosion by-products and rough surfaces may favor microbial habitat formation. | Controlled corrosion/scale management wording only |
| Cooling tower risk awareness | Cooling towers require controlled water management and site-specific microbiological programs. | PureGuard® Cooling; no Legionella-elimination claim |
| Closed-loop drift | HVAC loops may suffer pH drift, corrosion products, glycol degradation or low inhibitor residual. | PureGuard® Closed Loop |
| Boiler and RO protection | Utility steam and RO systems require proper product and dosage matching. | PureGuard® Boiler / RO-Watel |
System mapping
| System | Risk | Solution |
|---|---|---|
| Potable / utility networks | Corrosion, scale, material compatibility | PureGuard® Potable & Utility Water Treatment |
| Cooling towers | Scale, corrosion, deposits, microbiological-risk awareness | PureGuard® Cooling Tower Treatment |
| Closed loops / HVAC | Corrosion, pH, glycol-water, deposits | PureGuard® Closed Loop Treatment |
| Boilers / steam | Oxygen, pH, scale, condensate corrosion | PureGuard® Steam Boiler Treatment |
| RO / utility preparation | Membrane scaling and dose selection | PureGuard® RO + RO-Watel |
| Cleaning / flushing | Deposits, scale, under-deposit risk | PureGuard® Cleaning & Maintenance |
OUR APPROACH
From analysis to monitoring
Structured technical support at every stage of program selection and field review.
Analysis
Diagnosis
Treatment
Monitoring
Next step
Explore product families, request a document pack, or send water analysis for technical review.