The right coagulant is found in the water sample, not in a catalogue.
Product selection depends on sample behavior, pH, conductivity, particle type, organic load, mixing energy, equipment, sludge handling and field translation parameters.
Analysis First
Water analysis before product recommendation.
TDS, SDS and certificates are shared upon request.
Turbidity and TSS problems are visible, but the solution is not always obvious. Particle size, surface charge, colloidal stability, pH, conductivity, oils, color, polymers and process variability can change the treatment route. Liberta approaches turbidity, TSS and colloidal load through laboratory screening, jar-test validation and field translation. The goal is not only to find a product that works in a beaker, but to define how it must be dosed, mixed, reacted, settled and dewatered at site scale. This page should route visitors to BlancoWT® Coagulants, BlancoWT® Flocculants, Jar Test Services, Color Removal, Emulsion Breaking and Sludge/Dewatering-related support where applicable.
Typical water-related problems
| Problem | Why It Matters | Response |
|---|---|---|
| Colloidal stability | Fine particles may remain suspended because of charge, pH, surfactants or organic load. | |
| High TSS / turbidity | Suspended solids can overload clarification, DAF, filtration or downstream biological treatment. | |
| Variable wastewater | Batch changes can change pH, color, particles, oils and polymer demand. | |
| Poor floc formation | Incorrect product type, charge, mixing speed or dosing sequence can lead to weak flocs. | |
| Dewatering burden | Poor coagulation/flocculation can increase sludge volume or reduce filter press/centrifuge performance. |
System mapping
| System | Relevance | Related Page |
|---|---|---|
| Industrial wastewater treatment | Clarification, coagulation/flocculation, DAF, filter press or centrifuge | 4.6 Wastewater Treatment |
| RO pretreatment | TSS, turbidity, colloidal load and SDI reduction before membrane systems | 4.1 RO & Membrane Treatments / 5.4 RO Membrane Scaling & Fouling |
| DAF systems | Particle, oil, color and sludge separation routes | 3.6 Jar Test Services |
| Sludge line / dewatering | Filter press, centrifuge and thickening performance | 3.2 BlancoWT® Flocculants |
| Color-associated wastewater | Textile, paper, food and process effluents with color + solids load | 3.4 BlancoWT® Color Removal |
OUR APPROACH
From analysis to monitoring
Structured technical support at every stage of program selection and field review.
Analysis
Diagnosis
Treatment
Monitoring
Next step
Explore product families, request a document pack, or send water analysis for technical review.